deskthority

Mine just arrived. I'm on Spain. Fits my GON PCB just fine. Build time!

wacko78 wrote: So wafflepc, what are our options? Are we SOL? I did buy the plates specifically for a phantom build. Just let us know. Communicate.

Looks like he doesn't have a lot of time to check this but I'm pretty sure he'll do something.

Did someone from Europe get it yet? I'll be out two days and would be lucky as hell if it arrived tomorrow.

I was checking in on this thread and saw the alignment issues. So I checked my pcb and it is fine. I popped in a few switches too


Nice! It looks like us winkeyless/GON pcb users can sigh in relief (I'm pretty sure they're the same). But the phantom PCB still won't fit...

I actually never ...

Spaceman1200 wrote: Plates would work with a hand wiring job, but i doubt anyone wants to deal with that.

Yeah specially since for example I got a GON PCB and have been waiting just for the case for a long time.

What I thought is maybe hand wiring to the PCB only those switches but not sure how that would work...

Well shit. What can we do now?

Ok, sorry for the delays. All of the people who are overseas, ordered multiple plates, or ordered ISO have not been shipped yet. It is also the holidays, where shipping takes a day or two longer, and i am shipping economy because of the sheer number. i am very sorry for the amount of time it took ...

So, if I got no email/pm, that means that info and stuff is fine but you just haven't shipped it yet? How long will it take?
If you havent gotten one, then it is possible that i have shipped it, i am not emailing each person as they ship theirs because its easier to ship them in large loads at a ...

Yes, but mostly shipping out on Saturday and Sunday.

Hey, wafflepc! Were you able to get any shipped out this weekend?
No, but i did yesterday, and today, still need to get more because a large number i did not have the addresses of :D

So, if I got no email/pm, that means that info and stuff ...

Yeah, i have been looking at packaging and shipping options. I might do padded envelopes and slap a fragile sticker on them and put lots of bubble wrap.

The thing is, that if the price is around that, they just can't make you pay customs (because of some law IIRC) at least in my country and most ...

wafflepc wrote:

heroinbob wrote: You said shipping this week - is this still correct?

Paul (HB)
Location - California

Yes, but mostly shipping out on Saturday and Sunday.

When you ship internationally, if possible set the value as $20 or less and as a gift, to avoid custom fees.

Hey people. They have shipped, and are currently... (checking AfterShip app)... "Shipment transiting from 【Shanghai Pudong Distribution Center】" . It is not the fastest shipping, since it already costs a fortune to ship. It will take some time to ship.

50-53kg of plates. Yeah, im not kidding ...

Looks like your Gon pcb has its usb plug in a different spot. Could you measure center of the big hole to center of the usb connector?

Don't really understand what do you mean :( But if it's about sizing should be the same, just centered between F12 and Print Screen instead of between PrintSC and ...

The GON PCB with the connector at the bottom looks like this, so it doesn't look like the connector is at the same spot.

Ok, first off thank you to wafflepc for getting me the cad file for the plate so we can get midsections made. Please let me know if I should create another thread for this. It may start to get too convoluted as one. Attached is a prelimanry drawing. I could use some feedback please as to thickness ...

Ok, first off thank you to wafflepc for getting me the cad file for the plate so we can get midsections made. Please let me know if I should create another thread for this. It may start to get too convoluted as one. Attached is a prelimanry drawing. I could use some feedback please as to thickness ...

wafflepc wrote:

Spaceman1200 wrote:Hate to be that person but, Any updates?

Yes! Shipping to me in 8 days! Sorry for the long wait. Ill make a separate post about that later or tommorow.

Wow that'll be a long time T.T Got the rest of the parts waiting

samhwang wrote:

skiwithpete wrote:

wafflepc wrote: PM me if you want to use it for the mid section!

PM me if you're making midsections and want to sell me one!

Same !!

I'm in!

*waiting intensifies*

I do not. The original plan was to have someone in europe, and ill look at shipping costs.

Hope it's not too long... I guess my Zealios and GON parts will be waiting for the case for some time.
That's my plan as well. Do you have a source for stabilizers? I didn't pick any up from Gon.

I ...

wafflepc wrote: I do not. The original plan was to have someone in europe, and ill look at shipping costs.

Hope it's not too long... I guess my Zealios and GON parts will be waiting for the case for some time.

wafflepc wrote: Ok! The order is in!

Do you have any idea of how long it takes to produce, and then ship to you and then ship to everyone? I don't want to wait too much ;_; maybe have someone in Europe that ships it around here too?

Zealio switches ordered too, now I just have to save up some money for the GON parts and I'll be done!

Ya. I know. Same thing I looked at. Last week Wednesday I bought the bare pcb. I got messaged that all he had in stock was presoldered boards and I needed to add on $15. So I have the presoldered version on the way to me.

So I just basically add the $75 one? (this http://www.gonskeyboardworks.com ...

Yeah, no Teensy on the GON. Ends up about the same price, and the shipping is cheaper to EU ($20 instead of $50). You might want to get one with the surface mount components pre-baked.

That's for the diodes/resistors already installed right? (because they're SMD). I think I could solder them ...

Yeah, no Teensy on the GON. Ends up about the same price, and the shipping is cheaper to EU ($20 instead of $50). You might want to get one with the surface mount components pre-baked.

That's for the diodes/resistors already installed right? (because they're SMD). I think I could solder them ...

wafflepc wrote: The phantom has pretty obvious markings for the teensy, andi haveno experience with the gon pcb.

Well then if someone can tell if this is compatible for sure it'd be amazing, since I'd like to install LEDs on my keyboard.

Anyone know if the GON TKL KMAC/GON TKL pcbs will mount properly in this? I'm pretty sure it won't matter but don't want to put the $$ down in case there's something I've overlooked
Im not actually sure on the Kmac, but the regular GON tkl pcb should fit.

I'd actually like to know this because ...

This might seem like a dumb question, but where can I get the screws/bolts that are usually used for these kind of cases/plates?

I commit at $30 too.